Skoda Bolero Operating Instructions Manual page 12

Notes for the care of the CDs
If a CD is soiled, please never clean the CD in the direction of a circle but rather
from inside to outside with a soft lint-free cloth. In case of severe layers of dirt we
recommend to clean the CD with a commercially available CD cleaner. Also in this
case do not clean the CD in the direction of a circle but rather from inside to out-
side and then let it dry off.
WARNING
The CD player is a 1st class laser product. There is a definite risk of injury
■
from invisible laser beams if it is opened.
The CD player contains no parts that have to be serviced or repaired. Please
■
contact your specialist garage if a mechanical defect occurs or the CD player
has to be repaired.
CAUTION
Never use liquids such as gasoline, paint thinner or disk cleaner, otherwise the
■
surface of the CD could get damaged!
Never expose the CD to direct sun rays!
■
Please never write or affix the CD!
■
Note
Dirt or damage of a CD can lead to difficulties when "reading" the information.
The difficulty in reading the error depends on the dirt or on the severity of the
mechanical damage. Severe scratches cause reading errors which can make the
CD jump or "get stuck". All CDs must be treated carefully and always be stored in
a protective case.
External sources
Input AUX
›
The input for external audio sources AUX is located under the armrest of the
front seats.
›
Activate the AUX input by pressing the button
pressing the function key .
AUX
›
External audio sources, which are connected to the AUX input, cannot be
operated via the radio.
10
Basic setting
Ð
and by subsequently
MEDIA
Input MDI - Multimedia socket (MEDIA)
›
The input for the external audio sources MDI is located under the armrest of
the front seats, in the storage compartment of the front passenger side or in a
storage compartment of the centre console (according to vehicle model).
›
Activate the MDI input by pressing the button
pressing the function key .
MDI
›
Audio data in MP3, WMA, OGG Vorbis and AAC format from the external data
stickers, connected to the MDI input, can be played via the radio.
›
External audio sources, which are connected to the MDI input, can be operated
via the radio.
It is possible to play back external audio sources via the loudspeakers of the radio
in the vehicle.
You can select another audio source on the radio at any time. As long as the ex-
ternal audio source is not switched off, it remains always active in the back-
ground.
Please refer to the Owner's manual of the respective manufacturer for the opera-
tion of the external audio source.
If a MEDIA socket is additionally installed, the button
of the function key in the Audio menu. Please note that an audio source con-
AUX
nected to the AUX socket can only be replayed, if there is currently no data
carrier connected to the MDI input.
Use the standard jack plug 3.5 mm for the AUX socket. If the external audio
source does not have this jack plug, you must use an adapter.
Adjust the play function volume of the external audio source
The play function volume of the external audio source can be changed via the vol-
ume control on the radio.
Depending on the connected audio source, the output volume on the external au-
dio source can be changed.
You can also change the input sensitivity of the external audio source, in order for
the play function volume of the external audio source to adapt to other audio
sources or to avoid distortions of the play function volume.
Adapter
A special adapter is required to connect audio sources via the input MDI.
We recommend that you purchase an adapter for connecting the USB devices, the
devices with Mini USB output or an iPod, at an authorised ŠKODA Service Partner.
and by subsequently
MEDIA
is displayed instead
MDI
