Caller Id - NEC Aspire Handbook

Caller ID

Caller ID allows a display keyset to show an incoming caller's telephone
number (up to 12 digits) and optional name. The Caller ID information
can be displayed before and after answering a call. The system provides
the Caller ID pre-answer display which allows you to preview the
caller's number before picking up the ringing line. Depending on pro-
gramming, it may also be displaed after answering a call. This informa-
tion is stored in Abbreviated Dialing bins or under one-touch keys.
Display telephone users have the ability to check the identity of an
incoming call while they are currently busy on a call. The type of
information that displays will depend on the type of call being
received. Intercom calls will display station names, while incoming
trunk calls will display Caller ID, ANI or the name assigned to the
line. Depending on the system programming, this information can be
displayed either automatically or manually.
Caller ID will temporarily store 16 calls (this included abandoned or
unanswered calls). New calls replace the old calls when the maximum
number of calls is reached. An unanswered call will cause the Call
History key to flash, indicating a new call has been placed in the tem-
porary memory. If enabled in programming, the telephone's display
will show "CHECK LIST".
To display Caller ID
for calls lamping your
phone or not auto-
matically displayed
( without Automatic
Handsfree enabled):
To manually display
caller information for
a second call:
28
1. Do not lift the handset and press
If the Caller ID data includes the
name, you can scroll left and right by
pressing * and #.
2. or press
1. While on a call with a second call ringing
in, press
The display indicates caller information.
To view Caller ID after answering a call
when Privacy Release is used, press CHECK
+ CLEAR. Pressing the line key can also be
done, but the call is then made private.
2. To clear the display, either press
it will clear on it's own.
to answer the call.
+ flashing
.
.
or