Voice Over - NEC Aspire Handbook

Voice Over

If you need to get through to a co-worker busy on another call, press
your Voice Over key. After the Voice Over alert tone ends you can talk
to your busy associate. They can respond to you without their initial
caller hearing. Your co-worker can even switch back and forth between
you and their initial call. Your Voice Over key shows the feature's status:
When the key is . . .
Off
Flashing (red)
On (green)
For other ways to get through to a busy co-worker, see Call Waiting
(page 26), Callback (page 27), Off Hook Signaling (page 76),
Message Waiting (page 68) and Voice Mail (page 122).
Bleed over (the outside caller hears the Voice Over) can occur with
To initiate a Voice
Over to a busy
co-worker:
To answer a Voice
Over you receive:
To return to your
initial call:
126
the handset, speakerphone, or headset.
You can only leave a Voice Over if you hear
two Off Hook Signaling tones or ring-busy.
1.
and your Voice Over Key flashes. You
can talk to your co-worker after the
alert tone ends.
1. Press and hold flashing
Over).
then you can talk to the interrupting
party. Note that you cannot respond by
dialing the Voice Over feature code (6).
1. Release
repeatedly to switch between your ini-
tial call and the interrupting party.
You are . . .
Not using Voice Over
Listening to the interrupting party
Responding to the interrupting party
(Voice Over) or
You hear the Voice Over alert tone
The Voice Over key lights (green) and
You can press your Voice Over key
.

(Voice Over).

(Voice