GRAPHTEC CSX300-09 User Manual page 6

When disconnecting the power cable, be sure to hold on to
the plug, and not pull on the cable itself.
• Pulling on the cable will expose the core wires, or cause damage
such as broken wires. Current leakage from the exposed or damaged
areas may result in a fire hazard or electric shock.
Before cleaning the scanner, be sure to unplug the power
cable from the power outlet.
• Failure to do so may result in electric shock.
Do not allow dust or metallic matter to adhere to the power
plug.
• If the power plug becomes dirty, thoroughly wipe it clean.
• The use of a dirty power plug may result in a fire hazard or electric
shock.
As a general rule, do not use an extension cord.
• Use of an extension cord may result in a fire hazard or electric shock.
If you must use an extension cord, unbundle it, and make sure that
the power plug is firmly inserted into the extension cord socket.
Make sure that the power plug can be readily unplugged at
any time, and that there are no objects placed in its vicinity.
• Objects placed in the vicinity of the power plug will prevent its removal
in an emergency.
Caution
v