Configuration Backup - Planet WGSD-10020 User Manual

• Firmware File Name
Buttons
: Click to upgrade firmware.
DO NOT Power OFF
Do not quit the Firmware Upgrade page without press the "OK" button - after the image be
loaded. Or the system won't apply the new firmware. User has to repeat the firmware
upgrade processes again.

4.2.19 Configuration Backup

This function allows backup and reload the current configuration of the Managed Switch to the local management station. The
Configuration Backup screen in
You can save/view or load the switch configuration. The configuration file is in XML format with a hierarchy of tags:
Header tags:
Section tags:
Module tags:
Group tags:
The name of firmware image.
(Maximum length : 24 characters)
the Managed Switch until the update progress is complete.
Figure 4-2-23 appears.
Figure 4-2-23 Configuration Save page screenshot
<?xml version="1.0"?> and <configuration>. These tags are mandatory and must be present
at the beginning of the file.
<platform>, <global> and <switch>. The platform section must be the first section tag and
this section must include the correct platform ID and version. The global section is optional
and includes configuration which is not related to specific switch ports. The switch section is
optional and includes configuration which is related to specific switch ports.
<ip>, <mac>, <port> etc. These tags identify a module controlling specific parts of the
configuration.
<port_table>, <vlan_table> etc. These tags identify a group of parameters, typically a table.
User's Manual of WGSD-10020 Series
72