Web Firmware Upgrade - Planet WGSD-10020 User Manual

The page includes the following fields:
Object
• Temperature settings
for priority groups
• Port priorities
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.

4.2.17 Web Firmware Upgrade

This page facilitates an update of the firmware controlling the switch. The Web Firmware Upgrade screen in
appears.
To open Firmware Upgrade screen perform the folling:
1. Click System -> Web Firmware Upgrade.
2. The Firmware Upgrade screen is displayed as in
3. Click the "
4. Select on the firmware then click "
5. Once the software be loaded to the system successfully. The following screen appears. The system will load the new
software after reboot.
Description
The temperature at which the ports with the corresponding priority will be turned
off. Temperatures between 0 and 255 C are supported.
The priority the port belongs to. 4 priorities are supported.
Figure 4-2-20 Web Firmware Upgrade page screenshot
"button of the main page, the system would pop up the file selection menu to choose firmware.
", the Software Upload Progress would show the file upload status.
Figure 4-2-20.
70
User's Manual of WGSD-10020 Series
Figure 4-2-20