Acl Rate Limiter Configuration - Planet WGSD-10020 User Manual

• Logging
• Shutdown
• Counter
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
: Click to refresh the page; any changes made locally will be undone.
: Click to clear the counters.

4.10.5 ACL Rate Limiter Configuration

Configure the rate limiter for the ACL of the switch.
The ACL Rate Limiter Configuration screen in
The default value is "Disabled".
Specify the logging operation of this port. The allowed values are:
Enabled: Frames received on the port are stored in the System Log.
Disabled: Frames received on the port are not logged.
The default value is "Disabled".
Please note that the System Log memory size and logging rate is limited.
Specify the port shut down operation of this port. The allowed values are:
Enabled: If a frame is received on the port, the port will be disabled.
Disabled: Port shut down is disabled.
The default value is "Disabled".
Counts the number of frames that match this ACE.
Figure 4-10-5 appears.
214
User's Manual of WGSD-10020 Series