• Power Allocation
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
4.16.4 PoE Status
This page allows the user to inspect the total power consumption, total power reserved and current status for all PoE ports. The
screen in
Figure 4-16-4
appears.
than the Power Reservation value.
Once power overload detected, the port will auto shut down and keep on
detection mode until PD's power consumption lower than the power limit value.
It can limit the port PoE supply watts. Per port maximum value must less than
30.8 watts, total ports values must less than the Power Reservation value.
Once power overload detected, the port will auto shut down and keep on
detection mode until PD's power consumption lower than the power limit value
Figure 4-16-4 PoE Status screenshot
310
User's Manual of WGSD-10020 Series