Planet WGSD-10020 User Manual page 307

port/PD is specified in the Maximum Power fields. The ports are shut down when total reserved powered exceeds the
amount of power that the power supply can deliver.
In this mode the port power is not turned on if the PD requests more power the available.

Consumption mode
In this mode the ports are shut down when the actual power consumption for all ports exceeds the amount of power that the
power supply can deliver or if the actual power consumption for a given port exceeds the reserved power for that port. The
ports are shut down according to the ports priority. If two ports have the same priority the port with the highest port number
is shut down.

Priority mode
In this mode the user assign the priority to the ports/PD. When the total PoE power consumption request is over the allowed
power supply limitation, the system shut down PoE ports by port priority setting.
Ethernet Port Configuration
This section allows the user to inspect and configure the current PoE port settings
The page includes the following fields:
Object
• System PoE Admin
Mode
• Power Management
Mode
Figure 4-16-2 PoE Configuration screenshot
Description
Allows user enable or disable PoE function. It will causes all of PoE ports supply
or not supply power.
There are five modes for configuring how the ports/PDs may reserve power and
when to shut down ports.
Classification mode
Allocation mode
Consumption mode
307
User's Manual of WGSD-10020 Series
, screen in Figure 4-16-2 appears.