Planet WGSD-10020 User Manual page 308

8-port 10/100/1000 mbps (poe plus) +2 100/1000x sfp managed ethernet switch
Hide thumbs Also See for WGSD-10020:
Table of Contents

Advertisement

• Power Supply Budget
[W]
• Temperature
Threshold
• PoE Usage Threshold
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
For WGSD-10020HP, the total PoE power reservation from Port-1~24 is up to 150W
PD Classifications
A PD may be classified by the PSE based on the classification information provided by the PD. The intent of PD classification is
to provide information about the maximum power required by the PD during operation. Class 0 is the default for PDs. However,
to improve power management at the PSE, the PD may opt to provide a signature for Class 1 to 4.
The PD is classified based on power. The classification of the PD is the maximum power that the PD will draw across all input
voltages and operational modes.
A PD shall return Class 0 to 4 in accordance with the maximum power draw as specified by
Class
Usage
0
Default
1
Optional
2
Optional
3
Optional
4
Optional
Priority mode
The default PoE management mode is "Consumption mode".
Set limit value of the total PoE port provided power to the PDs.
For WGSD-10020HP, the available max. value is 150.
Allows setting over temperature protection threshold value. It system
temperature was over it then system lower total PoE power budget automatically.
Allows setting how much PoE power budget could be limited.
Range of maximum power used by the PD
0.44 to 12.95 Watts
0.44 to 3.84 Watts
3.84 to 6.49 Watts
6.49 to 12.95 Watts (or to 15.4Watts)
12.95 to 25.50 Watts (or to 30.8Watts)
Table 4-16-1 Device class
User's Manual of WGSD-10020 Series
Classification unimplement
308
Table 4-16-1.
Class Dsecription
Very low power
Low power
Mid power
High power

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wgsd-10020hp

Table of Contents