Modem Port Baud Rate Configuration - Comtech EF Data Radyne RCS20 Installation And Operation Manual

RCS20 M:N Redundancy Switch
User Interfaces
4.3.2.4.1

MODEM PORT BAUD RATE CONFIGURATION

This subscreen allows the user to modify the Modem Port Baud Rate.
Programming steps:
1. Select either <9600>, <19200>, <38400>, or <57600> to select the baud rate.
2. Press <CLR> or <NEXT> to abort programming (no switch parameters will be changed).
3. Press <ENT> to load the information on the screen into the switch parameter table. Switching
will occur immediately after pressing <ENT>.
Key Label
S1 9600
S2 19200
S3 38400
S4 57600
Numeric
---
Keypad
MODEM PORT BAUD RATE CONFIGURATION
RCU20 MODEM PORT BAUD RATE : 1200
9600 19200
Function
Press to select 9600 bps.
Press to select 19200 bps.
Press to select 48400 bps.
Press to select 57600 bps.
Press <CLR> to abort programming (no switch parameters will be changed).
4–42
38400 57600
Rev. 14
MN-RCS20