Assembly Step; Paragon - Horizon Fitness PARAGON 4 Owner's Manual

ASSEMBLY STEP 4

HARDWARE FOR STEP 4 :
BOLT (I) SPRING WASHER (C)
M8 x 15 mm Φ 8.2 mm
Qty: 4 Qty: 4
BOLT (I)
SPRING WASHER (C)
FLAT WASHER (D)
BOLT (I)
SPRING WASHER (C)
FLAT WASHER (D)

(PARAGON 6)

FLAT WASHER (D)
Φ 8.2 mm
Qty: 4
Open HARDWARE BAG 4.
A
Gently hold the CONSOLE above the
B
CONSOLE MAST.
Connect the CONSOLE CABLES, carefully
C
tucking wires in masts to avoid damage.
Attach the CONSOLE to the CONSOLE
D
MAST using 4 BOLTS (I), 4 SPRING
WASHERS (C) and 4 FLAT WASHERS (D).
Fold the DECK into the upright position until
E
the foot latch engages. Make sure the spacing
between the HANDLEBARS and the DECK
are the same then tighten BOLTS from step 2
to step 4.
Paragon 6
Shown
9