Permobil Koala Service Manual page 14

Magnetic brake
Fitting
1. Use the adjusting screws to adjust the
magnetic brake. Set both screws flush with
back surface of the brake, then turn the screws
downwards 1/8 turn, see fig. 24.
2. Fit the brake disc into the magnetic brake.
3. Fit the cover.
4. Insert a bolt (26:1) to align the parts.
Fig. 24. Use the two adjusting screws
to adjust the brake.
Fig. 25. Magnetic brake, brake disc, cover
and rubber seal removed.
1
2
Fig. 26. Use a bolt (1) to align the parts.
14