Hdd Mode Screen - Focus FS-4/ User Manual

Fs-4/fs-4pro portable dte recorder

Hide thumbs Also See for FS-4/:

Table of Contents

Snap (FS-4Pro only)

When you select SNAP and press REC, a single frame is grabbed.

SNAP can be used with LOCAL and SYNCRO RECORD control

modes. If SNAP is the RECORD MODE when you turn off the power

or power is interrupted, upon re-boot, the FS-4 will be in NORMAL

REC mode.

Time Lapse (FS-4Pro only)

You can select an interval of up to twenty-four hours. The interval is

the period of time between the FS-4 capture of a single frame of video

(a value of 00:00:00:00 means no frames will be recorded).

Step 1:

Press the Right Navigation key from the Record Screen

to display the TIME LAPSE screen.

Step 2:

Use the Left and Right navigation keys to sequence

through HH:MM:SS:FF.

Step 3:

Use the Up and Down navigation keys to increment and

decrement values. The value is automatically limited to 24

hours.

Step 4:

Use BACK to return to the RECORD Screen with the

current cursor row set to TIME LAPSE value.

The "HH:MM:SS:FF" row is for display only.

HDD Mode Screen

Value selections on this screen are mutually exclusive.

Table of Contents

Fs-4pro