Select A Dv File Format; Recording With Fs-4; Recording With - Focus FS-4/ User Manual

Fs-4/fs-4pro portable dte recorder

Hide thumbs Also See for FS-4/:

Table of Contents

Select a DV File Format

After setting the time and date, but before recording, you should set

the DV file format as follows:

Step 1:

Press the Right navigation key several times until the DV

Formats Screen appears on the screen as shown below:

For a complete and up-to-date list of supported applica-

tions and their associated formats, visit the website:

http://www.firestore.com

Step 2:

Use the Up and Down navigation keys to select the

required DV file format that supports your NLE system.

The dash on the left side of the selection indicates the

current selection. The default value is AVI Type 2.

Step 3:

Press the center Select button on the navigation keys.

NOTE: 24p modes are only for use with camcorder's that are capable

of DV-24p Advanced mode.

Recording with the FS-4 consists of the following activities:

•

Manual Recording

•

Syncro Slave Recording or Tapeless Recording

In all cases, make sure that you have set the time and date, set the

recording format as explained above and connected the FS-4 to your

video camera as explained in "Connect the FS-4 to a DV Camcorder"

on page 12.

Table of Contents

Fs-4pro