Table of Contents
Advertisement
3.3.3 Play mode
To switch play modes between timeline and file list, click [Play Mode] button.
Normally, system choose timeline play mode as the default playback way as follows:
2. Select the camera
Following 4 steps to playback in this mode
:
Step1 Click to choose a day that you want to playback in the calendar located in the top right
corner of the interface.
Step 2 Click to select cameras that you want to playback in the down left corner of the
interface.
Step 3 Use the arrows to set the start time as bellows.
1. Select the date
4. Click the [Play] button
3. Set the timeline
Figure 3-8Playback Interface
Page 35 of 66
Advertisement
Table of Contents
Need help?
Do you have a question about the Colossus Pro and is the answer not in the manual?