LJD Digital Security Colossus Pro User Manual page 30

main window for a video, another sub window for another video), 4 (four videos display), 9
(nine videos display), 13 (thirteen videos display), 16 (sixteen videos display).
Video Layout: select a channel number from [Encoding Channel], drag them to appropriate
place in the right column, and continue to drag another one in multiple videos display modes.
Note: When multiple schemes have been selected in the left column, these videos will be
displayed on monitor or TV wall circularly, if none, then users can manual switch from
multiple schemes.
To use digital matrix
To use or enable digital matrix function, exit Digital Matrix Setting window, see the control
panel in the main interface. Click the Matrix tab and click the number button under the tab.
To start or stop digital matrix output, just click on the number to change the status of one
camera, or click [All]/[None] to select all the cameras to change state.
In the Digital Matrix Panel, a number in bight green background means that this number's
camera is in digital matrix output status.
Click [SCAN] to enable digital matrix output circularly.
Page 30 of 66