About This Documentation; Retention Of Documents; Symbols Used In This Document; Ce Marking - Kaco Powador 1501xi Operating Instructions Manual

S e ctio n 1 · About T his Docum en tati on
1 About This
Documentation
The following notes guide you through all of the documenta-
tion. Additional documents are applicable in conjunction with
these operating and installation instructions.
ATTENTION
We assume no liability for any damage caused by failure to
observe these instructions.
Other applicable documents
When installing the inverters, be sure to observe all assembly
and installation instructions for components and other parts of
the system. These instructions are delivered together with the
respective components and additional parts of the system.

1.1 Retention of documents

Please pass these operating and installation instructions on
to the plant operator. The plant operator retains the docu-
ments. The instructions must be available whenever they are
needed.

1.2 Symbols used in this document

When installing the inverter, observe the safety instructions
included in these installation instructions.
Failure to observe a warning indicated in this man-
ner will directly lead to serious bodily injury or
death.
Failure to observe a warning indicated in this man-
ner may directly lead to serious bodily injury or
death.
Failure to observe a warning indicated in this man-
ner may lead to minor or moderate bodily injury
or to serious damage to property.
Page 4
DANGER
WARNING
CAUTION
Failure to observe a warning indicated in this manner may
lead to damage to property.
Useful information and notes.
This symbol indicates that a certain action is required.
Failure to observe this information may result in reduced
convenience or impaired functionality.
Risk of voltage!
Risk of fi re or explosions!
Risk of burns!
Disconnect the inverter from
the PV generator!

1.3 CE marking

The CE marking is used to document that the Powador inverter
shown on the name plate fulfi ls the fundamental requirements
of the following relevant directives:
–
Directive concerning electromagnetic compatibility
(Council Directive 2004/108/EC)
–
Low voltage directive
(Council Directive 2006/95/EC).

1.4 Name plate

The name plate showing the exact designation of the unit is
located on the support plate on the underside of the housing.
Installation Instructions Powador 1501xi/2501xi*/3501xi/4501xi/5001xi**_EN
ATTENTION
NOTE
ACTION
IMPORTANT