5.7 Mask Area Setup
In some cases, maybe you want mask the sensitive area. This area will not be preview and
recorded. The mask area setup steps are following:
Step 1: Enter "Image Setup" menu:
Step 2: Select one camera: You can use[][]keys to select one camera.
Step 3: Enter mask area setup interface: Enable the check box beside "Privacy Mask" item,
you can press[EDIT]key to change the flag into "", and active "Area" button. Move "Active
Frame" to "Area" button on the right side of mask check box, press[ENTER]key to enter mask
area setup interface.
User Manual of DS-7000HI-S Series Net DVR
Page 49