5.7
Mask Area Setup
In some cases, maybe you want mask the sensitive area. This area will not be preview and
recorded. The mask area setup steps are following:
Step 1: Enter into "Image Setup" menu:
Step 2: Select one camera: You can use
Step 3: Enter into mask area setup interface: Enable the check box beside "Privacy Mask"
item, you can press EDIT key to change the flag into " ", and active "Area" button. Move
"Active Frame" to "Area" button on the right side of mask check box, press ENTER key to enter
into mask area setup interface.
Step 4: Setup mask area: In the mask area setup interface, there is one small yellow pane on
the upper left side. For PAL camera, the whole screen is divided into 22*18 panes (22*15 for
NTSC), you can use ↑ ↓ → ← keys to move the yellow pane to your hope position and press
User Manual of Embedded Net DVR
keys to select one camera.
Page
Total
55
113