Mask Area Setup - HIKVISION DS-8000AHI Series User Manual

5.7 Mask Area Setup

In some cases, maybe you want mask the sensitive area. This area will not be preview and
recorded. The mask area setup steps are following:
Step 1: Enter into "Image Setup" menu:
Step 2: Select one camera: You can use【】 【】keys to select one camera.
Step 3: Enter into mask area setup interface: Enable the check box beside "Privacy Mask"
item, you can press【EDIT】key to change the flag into "", and active "Area" button. Move
"Active Frame" to "Area" button on the right side of mask check box, press 【 ENTER】 key to enter
into mask area setup interface.
DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR
Page
Total
55 116