Table of Contents
Advertisement
Parameter
Main IP Address
Main IP Subnet
Mask
Alias IP Address
Alias
Main
IP
Subnet Mask
Dynamic Route
Multicast
DHCP
DHCP function can be disabled, enabled or in relay mode. Figure 12
shows the parameters when DHCP is enabled. And Table 13 gives
the parameter descriptions.
T
1 3 T
D
A B L E
H E
Parameter
Starting
IP
Address
IP Pool Count
Lease Time
DNS Relay
Primary
DNS
Server
Secondary DNS
Server
Description
Enter the ZXHN H108L local IP address. By default, it is
192.168.1.1.
Enter the ZXHN H108L IP subnet mask. By default, it is
255.255.255.0.
Enter the ZXHN H108L Second local IP address. By default ,it is
blank
Subnet mask of Second local IP address
Select the Routing Information Protocol (RIP) to be used from the
dropdown list. And select the direction from the dropdown list
Select the multicast protocol to be used from the dropdown list
E S C R I P T I O N S O F T H E
Description
Enter the starting IP address to be used by the DHCP server's IP
assignment. By default, the starting IP address is 192.168.1.2 and
the ending IP address is 192.168.1.254.
Enter the maximum user pool size to be assigned.
Enter the amount of time to lease out a given IP address.
Select the DNS relay option to be used from the dropdown list. If
the users do not want to use the DNS relay option, set the DNS
relay to "Use User Discovered DNS Server Only" and set both
Primary and Secondary DNS servers to 0.0.0.0.
Enter the primary DNS server IP address to be used. For user
discovered DNS only.
Enter the secondary DNS server IP address to be used. For user
discovered DNS only.
Confidential and Proprietary Information of ZTE CORPORATION
D H C P P
A R A M E T E R S
Chapter 4 - Interface Setup
25
Hide quick links:
Advertisement
Table of Contents
