Sending And Receiving Non-Verbal Messages; Lighting The Message-Waiting Light - Comdial Imression 2022S Reference Manual

GCA70–226
8
8.1

Lighting The Message-Waiting Light

The message waiting light lets a telephone user know you have a
message for him or her. In addition to the message waiting light, leaving
a message indication at a station that is a prime intercom, also causes the
dial tone at that station to sound in a broken manner when the station
user takes the telephone off-hook.
If a telephone that receives a message has a DSS button that is
programmed to call the station that left the message, the light next to that
DSS button on the message-receiving station will flash.
• To turn on the message-waiting light (and a broken dial tone)
at another station that is idle or busy,
1. Press INTERCOM.
2. Dial 3.
3. Dial extension number of station to be alerted. The
message-waiting light of called station will flash.
• You can also turn on the message-waiting light and broken
dial tone at another station when that station is busy,
1. Call the station.
2. Press MSG.
3. Hang up.

Sending And Receiving Non-Verbal Messages

Sending And Receiving
Non-Verbal Messages
LCD Speakerphone Reference Guide 8 – 1