HighPoint RocketRAID 268x User Manual page 17

Rocketraid 268x sas/sataii host adapter

Table of Contents

RocketRAID BIOS Utility

Highlight the target disks using the arrow keys, then select using Enter. A numeral

will be displayed before each selected disk. Once all target disks have been selected,

press ESC. The utility will display a warning, and ask you to press Y (yes) to initialize,

or N (no) to cancel. Once initialized, these disks can be used to create RAID arrays.

Warning: Initialization will destroy all pre- existing data on the selected hard

disks. Only initialize disks that do not contain critical data.

Creating Arrays:

Select Create from the toolbar and press Enter.

1. Use the arrow keys to select the RAID level and press ENTER.

Table of Contents