Table of Contents
Advertisement
Hardware – Description and Installation
2 – LED Connections
RocketRAID 2680
LED connectors (Drive-activity/Drive-failure): LED support is discussed in greater
detail in the LED Connection section. The RocketRAID 2680 host adapter has 4 LED
connectors that are used to indicate the activity and failure status of hard drives to
the card's 8 SATA/SAS channels.
Active and Failure LED
A1-A2 provides LED support for Drive Activity, while F1-F2 supports Drive Failure.
RocketRAID 2684
LED connectors (Drive-activity/Drive-failure): LED support is discussed in greater
detail in the LED Connection section. The RocketRAID 2684 host adapter has 2 LED
connectors that are used to indicate the activity and failure status of hard drives
attached to the card's 4 SATA/SAS channels.
A1, F1
A1 provides LED support for Drive Activity, while F1 supports Drive Failure.
Pin Connections represent SATA/SAS channel/port antitheses table
11
Advertisement
Table of Contents
