Water Pump Setup For Operation - MK Diamond Products MK-660 SERIES Owner's Manual & Operating Instructions

SETUP, ADJUSTMENT and OPERATION

3. Water Pump Setup for Operation:

The Water Pump can be setup for operation in two ways, External Water Source or Re-circulation.
NOTE: If using a dry blade for operation, DO NOT connect the water pump.
I. External Water Source:
This is the preferred method of cooling.
(A)
Remove the Drain plug
(D)
Place an external catch Basin
below the Water Pan drain hole
II. Re-circulation:
NOTE: When using the re-circulation method, the water should be changed often for longer pump life.
(A)
Ensure the Drain Plug is
installed in the Water Pan
MK-660
Drain Plug
Place the Water Pump
In an external container
Catch
Basin
Drain Plug
Installed
Place the Water Pump in the
back of the Water Pan
Revision 07/04, Effective Date July 6, 2004
Cover Pump
Water Pump
In container
External
Container
(B)
Fill the external container until
Cover Pump
Water
Pump
(B)
Fill the Water Pan until water
Suction
(C)
water completely covers the
Water Pump suction
Suction
(C)
completely covers the Water
Pump suction
Page 17