Connecting The Water Pump; Water Pump Setup For Operation; Recirculation - MK Diamond Products MK-660 Owner's Manual & Operating Instructions

MK-660 tile saw

wateR PUMP setUP FOR OPeRatiON

The Water Pump can be setup for operation in two ways, External Water Source or Re-circulation.
NOte:
To prevent pump damage, the Water Pump must be disconnected if cutting with a Dry Blade.
(A)
Remove the Drain Plug
(A)
Place an external catch Basin
below the Water Pan drain
hole

ReCiRCUlatiON

NOte: When using the re-circulation method, the water should be changed often for longer pump life.
(A)
Ensure the Drain Plug is in-
stalled in the Water Pan
(B)
Place the Water Pump
in an external container
(B)
Place the Water Pump in the
back of the Water Pan
21
asseMBlY
(C)
Fill the external container until
water completely covers the
Water Pump suction
(C)
Fill the Water Pan until water
completely covers the Water
Pump suction