Water Pump Setup For Operation - MK Diamond Products MK-770 series Owner's Manual & Operating Instructions

SETUP, ADJUSTMENT and OPERATION

3. Water Pump Setup for Operation:

The Water Pump can be setup for operation in two ways, External Water Source or Re-circulation.
NOTE: If using a dry blade for operation, DO NOT connect the water pump.
I. External Water Source:
This is the preferred method of cooling.
(A)
Remove the Drain plug
Catch
Basin
(D)
Place an external catch Basin
below the Water Pan drain hole
II. Re-circulation:
NOTE: When using the re-circulation method, the water should be changed often for longer pump life.
(A)
Ensure the Drain Plug is
installed in the Water Pan
MK-770
Drain Plug Water Pump
In container
External
Container
Place the Water Pump
In an external container
Drain Plug
Installed
Place the Water Pump in the
back of the Water Pan
Revision 01/02, Effective Date January 10, 2002
Cover Pump
(B)
Fill the external container until
Water
Pump
Cover Pump
(B)
Suction
(C)
water completely covers the
Water Pump suction
Suction
(C)
Fill the Water Pan until water
completely covers the Water
Pump suction
Pag 17