Water Pump Setup For Operation - MK Diamond Products MK-101 Tracker Owner's Manual

SETUP, ADJUSTMENT and OPERATION

3. Water Pump Setup for Operation:

The Water Pump can be setup for operation in two ways, External Water Source or Re-circulation.
NOTE: If using a dry blade for operation, DO NOT connect the water pump.
(A)
Place Water Pump in Water Pan
I. External Water Source:
This is the preferred method of cooling.
Drain Plug
(A)
Remove the Drain plug
II. Re-circulation:
NOTE: When using the re-circulation method, the water should be changed often for longer pump life.
Drain Plug
(A)
Ensure the Drain Plug is
Installed in the Water Basin
MK-101 TRACKER
Place Water Pump Clamp as
Water Pump
In container
Place the Water Pump
In an external container
Installed
Water
Pump
Place the Water Pump in the
back of the Water Basin.
Revision 06/05, Effective Date June 07, 2005
(B)
shown
External
Container
(B)
(B)
(C)
Secure Clamp with ¼-20
wingscrews and nuts.
Cover Pump
Suction
(C)
Fill the external container until
water completely covers the
Water Pump suction
Cover Pump
Suction
(C)
Fill the Water Basin until water
completely covers the
Water Pump suction
Page 16