On Screen Display Setting - Hansol 520f User Manual

*1¿ 97.3.29 10:26 AM ˘ ` 10

On Screen Display Setting

Auto Adjustment
Automatically adjust the vertical position, Horizontal
Geometry
position, Horizontal size and Phase
Color Balance Automatically adjustment the contrast of the screen
Horizontal Position Adjust the horizontal position
Vertical Position Adjust the vertical position
Horizontal Size Adjust the width of the screenÕs image
Phase Adjust the noise of the screenÕs image
Brightness Adjust the intensity of the screen
Contrast Adjust the contrast of the screen
Color
Temperature Adjust the color temperature of the screenÕs image
Red Control the intensity of the Red colour of the screenÕs image
Green Control the intensity of the Green colour of the screenÕs image
Blue Control the intensity of the Blue colour of the screenÕs image
OSD Language Language
English English
French French
German German
Italian Italian
Spanish Spanish
Advanced
Factory Preset Load the factory preset mode
Sharpness Adjust the sharpness of the screenÕs image
DOS/GFX Select resolution 720 X 400 or 640X 400 mode
OSD H. Position Adjust the horizontal position of the OSD
OSD V. Position Adjust the vertical position of the OSD
Cancel Exit Without Saving
10
Preset Mode chart
Timing Charts
Support video timings this monitor shall be capable of display following video
timing chart.
Video
Active(T4)
Sync
Back Porch(T3)
Front Porch(T5)
Sync Width(T2)
Period(T1)
Input timing limits
H-sync pulse width 1.0us§ZSync Pulse Width§Z8.0us
V-sync pulse width 0.04ms§ZSync Pulse Width§Z0.5ms
Note
If the width of Sync pulse is out of input timing
range, monitor may be able to operate abnormal.
Be sure to check the sync pulse width of input
timing.
Input level limits
Low level : 0.4V max
High level : 2.4V min
Note
For better quality of display image, use the timing
and polarity shown in the preset mode table.
Please see your video card userÕs guide to
ensure compatibility.
11