Troubleshooting
No picture
Check that the AC cord is correctly connected.
Check that the AC socket is live by plugging in another piece of equipment.
Power switch and computer power switch should be in position.
Ensure that the signal cable is properly connected to the video card or PC.
Ensure that the video card is securely seated in the PC.
Check the connector for bent or pushed-in pins.
Press a key on the keyboard or move the mouse, in case the screen power-saver mode has
blanked the screen.
Image is scrolling or unstable
Signal cable should be securely attached to the computer.
Check the pin assignments and signal timings of the monitor and your video card with
respect to recommended timings and pin assignments.
Ensure that the video card is securely seated in the PC.
Picture is fuzzy
Adjust the Contrast and Brightness Controls.
Push the Degauss Button once.
Caution : A minimum interval of 20 minutes should exist before the Degauss Button is used a
second time. Do not hold the button down continuously.
Picture bounces or a waving pattern is present in the picture
Move electrical devices that may be causing electrical interference away from the monitor.
See the inside front cover of this manual for FCC information.
Unshielded audio speakers placed next to the monitor can cause picture distortion. Move
the speakers away.
Edges of the display image are not square
Adjust the distortion using the Side Pincushion or Trapezoid Pincushion Balance, Parallel
adjustment controls under the on screen menu.
Display image is not centered, too small, or too large
Adjust the horizontal and vertical image sizes using the Horizontal and Vertical Size
adjustment controls under the on screen menu.
12
User's Manual
Electrical Specifications
ITEM
CRT Type
CRT Dot pitch
CRT Surface
H/V Separate, TTL, positive/negative
Sync
Input
H/V Composite, TTL, positive/negative
Signal
Video
Horizontal
Scanning
frequency
Vertical
Maximum Resolution
Pixel Clock(Max.)
Display Size (Standard)
Horizontal 350mm, Vertical 262mm
Power Consumption(Max.)
Power Supply
Input Connector
Display Colors
Mechanical Specifications
ITEM
Unit
470mm(W) 462.5mm(D) 466mm(H)
Dimension
Carton
540mm(W) 537mm(D) 543mm(H)
Net
Weight
Gross
Environmental Specifications
ITEM
Operating
Temperature
Storage
Humidity
10% to 85% R.H. Non-condensing
Specifications
E19BL
19 , 90 deflection FST
0.26mm
Non-glare
RGB Analog (0.7Vp-p), positive
75
Terminated
30KHz~85KHz (Automatically)
47Hz~160Hz (Automatically)
1280Dots 1024Lines (75Hz)
135 MHz
110 Watts
AC 100~240Volt, 50/60Hz
3Hz
D-Sub, 15Pin Connectors
Unlimited
E19BL
18.5 (W) 18.2 (D) 18.3 (H)
21.6 (W) 22.6 (D) 22.4 (H)
43Ibs (19.5Kg)
49.6Ibs (22.5Kg)
E19BL
32 F to 104 F (0 C to 40 C)
-4 F to 140 F (-20 C to 60 C)
User's Manual
13
13