Connecting An Rj11 Telephone Handset; Using The Antenna Adaptor - Beam RST310 Installation And User Manual

4. Connecting an RJ11 telephone handset

1. Plug the telephone, answering machine or corded/cordless phone into the
Line and or Accessory Socket RJ11. It is important to note that Facsimile
Messaging is not supported on the Iridium Network via a standard RJ11
connection.
2. Plug the optional Intelligent Handset into the Handset Socket, RJ45. Note this
is only for the Beam RST970 Intelligent Handset ONLY

5. Using the Antenna Adaptor

The Antenna adaptor is required to be used with the RST978 module. The antenna
adaptor, supplied with your 9505A handset when purchased allows for an external
antenna to be used in conjunction with the 9505A handset, which is mandatory for a
fixed installation.
To attach the antenna adaptor follow these steps:
Connect the adaptor to the antenna
cable. The cable will be fitted with a TNC
screw connector for easy joining.
RST310 INSTALLATION & USER MANUAL
16
Supplied with handset