Installation procedure
1. Mount the RST310
2. Connect AC/DC Power cord
3. Connect 9505A handset cable
4. Fitting antenna adapter/external antenna
5. Connect a Laptop/PC
6. Connect RJ11 telephone handset
7. Power Up & Make/Receive calls
1. Mounting the RST310
The RST310 comes with two (2) standard right angle mounting brackets that allow
mounting for mobile and fixed positioning.
Note: To ensure sturdy mount attachment:
1. Mount the RST310 on a clean, even surface.
2. Clean the mount surface of the RST310.
3. Use the correct type of screws.
4. If mounting on a wooden surface,
structurally sound.
5.
Leave enough room around the RST310 to allow unhindered
access to the rear panel.
6.
Do not install the unit in a permanently concealed recess. You
must be able to access and remove the unit for future servicing.
1. The mounting brackets allow two mounting methods: drop-in (inside corner) mount
and flush (outside corner) mount.
RST310 INSTALLATION & USER MANUAL
12
make sure the wood is