Operating Instructions - Zanussi ZOB 580 User Manual

Then let the oven cool down. Then dampen a soft
cloth with warm water and a little mild washing-up
liquid and use this to clean the oven cavity.

Operating instructions

The timer
1
8 7
1
"Cooking Duration" pilot lamp
2 Display -"
3
"Minute minder" pilot lamp
4
"Time of day" pilot lamp
5 Increasing control button "+"
6
Push button for selecting a function
7 Decreasing control button "-"
8
"End of cooking" pilot lamp
The oven will only work if the time of day has been
set. However, the oven can also be operated without
any programme.
In the event of a power failure, all the settings (time
of day, programme setting or programme in opera-
tion) will be cancelled. When the power is restored, the
numbers in the display will flash, and the clock/timer has
to be reset.
Setting the time of day
When the power supply is switched on, or after a power
failure, the "Time of day" pilot lamp
display.
6
2 3
6 5 4
will flash on the
Before using for the first time, carefully wash the
oven accessories as well.
To set the correct time of day:
1. Press button "+" or "-".
2. After the setting is carried out, wait for 5 seconds:
the "Time of day" pilot lamp
display will show the set time. The appliance is
ready for use.
To reset the correct time of day:
1.
Press button repeatedly to select the "Time of
day" function. The relevant pilot lamp will start flash-
ing. Then proceed as described above.
The time of day can only be reset if no automatic function
(cooking duration or end of cooking
set.
Cooking Duration function
This function allows the oven to automatically switch off at
the end of a programmed cooking duration time. Place
food in the oven, select a cooking function and adjust the
cooking temperature. Press button
the "Cooking Duration" function. The relevant pilot lamp
will start flashing. Then, proceed as follows:
will go out and the
) has been
repeatedly to select