Table of Contents
Advertisement
7
DSC OPERATION
D
Transmitting a Polling Reply call
Transmit a Polling Reply call when a Polling Request call is
received.
When the "POSITION ACK" in DSC Settings is set to 'Auto'
(p. 68), the transceiver automatically transmits a reply call
when receiving a Polling Request call.
Quick Reply:
q When a Polling Request call is received, alarm sounds
and the screen shown below is displayed.
Push [ALARM OFF] to stop the alarm.
• Even if you do not push [ALARM OFF], the alarm stops after 2
minutes, and then the screen in step w is displayed.
Push [ACK].
w
51
• Push [INFO] to display the Polling Request call information.
Push [BACK] to return to the previous screen, or push [ACK].
The Polling Reply confirmation screen is displayed.
e
Push [CALL] to transmit the reply call.
r While transmitting the reply call, the screen shown below
is displayed, and then returns to the normal operating
mode.
Advertisement
Table of Contents
