Icom iM506 Instruction Manual page 19

D Channel group selection
There are preprogrammed USA channels, International chan-
nels and Canadian channels. These channel groups may be
specified for the operating area.
q Push [MENU].
[Ω]/[≈]
w Rotate dial or push
icon and then push the softkey below the icon.
• RADIO SETTINGS menu is displayed.
e Rotate dial or push [∫]/[√] to select "CHAN Group," and
then push [ENT].
r Rotate dial or push [∫]/[√] to select the desired channel
group, and then push [ENT].
• USA (USA), International (INT) and Canadian (CAN) channel
groups can be selected.
to select the "RADIO SET"
t Push [EXIT] to exit the Menu screen.
y Push [∫](CH) or [√](CH) to select a channel.
• Pushing [Y]/[Z] on the microphone selects only Favorite chan-
nels.
•You can turn OFF the FAV on MIC setting (p. 100). After that, you
can select all channels by the microphone.
• The "DUP" icon appears when a duplex channel is selected.
• "A" appears when a simplex channel is selected.
Channel group icon appears
When the
channel group is selected.
BASIC OPERATION
International
4
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
10