Epson EPL-N2700 Service Manual page 39

EPSON EPL-N2700 / N2750
Table 1-23. EPL-2700 SelecType Option
MENU Button
ITEM Button
Text
CGTable
Country
Auto CR
Auto LF
Bit Image
ZeroChar
I239X Menu
Font
Pitch
Code Page
T. Margin
Text
Auto CR
Auto LF
Alt. Graphic
Bit Image
ZeroChar
CharacterSet
*22
Maintenance Menu
Engine Status Sheet
Fuser Counter Clear
LC1 Counter Clear
*21
LC2 Counter Clear
*21
LC3 Counter Clear
MP Counter Clear
Product Description
VALUE Button
*19 *20
1 - 62 - 66 - available (max 111) lines
PcUSA / Italic / PcMultilin / PcPortugue /
PcCanFrenc / PcNordic / PcTurkish2 /
PcE.Europe / BpBRASCII / BpAbicomp /
8859-15ISO / PcEur858
USA / France / Germany / UK / Denmark /
Sweden / Italy / Spain1 / Japan / Norway /
Denmark2 / Spain2 / LatinAmeric
ON / OFF
OFF / ON
Dark / Light / BarCode
0 / 0 (slashed)
Courier / Prestige / Gothic / Orator / Script /
Presentor / Sans serif
10cpi / 12cpi / 15cpi / 17cpi / 20cpi / 24cpi /
Prop.
437 / 850 / 860 / 863 / 865
0.30 - 0.40 - 1.50 (step: 0.05")
*19 *20
1 - 63 - 67 - available (max 111) lines
OFF / ON
OFF / ON
OFF / ON
Dark / Light
0, 0 (slashed)
*19 *20
1 / 2
Table 1-23. EPL-2700 SelecType Option
MENU Button
ITEM Button
TR Counter Clear
Error Log Clear
NOTES:
1: Appears only when an optional PostScript Level 3 DIMM is installed.
2: Appears only when an optional TypeB Interface Card is installed.
3: Appears and can be selected only when an optional lower cassette unit is installed.
4: Does not appear on the panel nor status sheet.
5: When "Auto" is selected, the following paper sizes can be detected.
- North American version: LT, HLT, LGL, EXE, GLG, GLT, B
- Other versions:A3, A4, A5, IB5, LTR, LGL, F4
6: Appears and can be selected only when 5-Bin Unit or 10-Bin Unit is installed and
the Stacker mode is enabled.
7: Appears and can be selected only when 5-Bin Unit (Mail box 1 - 4) or 10-Bin Unit
(Mail box 1-9) is installed in the Mailbox mode.
8: Does not appear.
9: Effective only in the ESC/Page or PCL mode.
10: Appears only when an optional Duplex Unit is installed.
11: Appears only when an optional 5-Bin Unit or Finisher is installed.
12: Does not appear.
13: Appears but not to be selected.
14: STANDBY command of the EJL is also supported. The default is 60 minutes. (Not
intended for users.)
15: Does not appear on the panel nor status sheet. Only set in EJL.
16: Appears only in the GLike mode.
17: The selected value is not effective until the next warm boot or power on.
18: Appears only when the NLSP Bitmap 3 Plus ROM DIMM is installed.
19: Default for the North American version.
20: Default for the versions other than the North American version.
21: Appears even though the optional unit is not installed. The counter is also cleared.
22: Either one is indicated according to the selected font type. If you select rated pitch
font, "Pitch" will be displayed, and if you select proportional font, "Height" will be
displayed.
23: Indicated when optional font DIMM is installed in the optional ROM DIMM socket.
Panel Operation
Revision B
VALUE Button
39