EPSON EPL-N2700 / N2750
4.1 Overview
4.1.1 Precaution
Observe the following instruction well before starting servicing.
Before servicing, turn the printer power off and
n
W A R N I N G
unplug the power code from the AC socket.
Before removing the fuser and nearby parts, turn the
n
printer off and wait for at least 30 minutes to lower the
fuser temperature.
Since the printer weighs 30 Kg, be sure to carry the
n
printer with 2 people.
C A U T I O N
Before starting servicing, make sure the following
points:
Interface cable is disconnected from the back of the
n
printer.
No option is installed on the printer.
n
Wear the wrist strap to release static electricity so
n
you can avoid damaging static electricity sensitive
components.
Disassembly/Assembly
4.1.2 Tools
The tools used to disassemble/assemble this printer are as listed below:
Name
Phillips screw driver
Phillips screw driver
Standard driver
Tweezers
Pillars
*1: A = Available on the market
Overview
Table 4-1. Tool List
Availability
Code
*1
A
B743800100
A
B743800500
A
B743000100
A
B641000100
A
B740400100
Revision B
98