EPSON EPL-N2700 / N2750
4.2.16 High Voltage Unit Removal
1. Remove the Top Cover. (See Section 4.2.11.)
2. Open the vertical transport door.
3. Remove two screws (3504) securing the High Voltage Unit Cover to
the printer frame, and remove the cover.
4. Disconnect harnesses from the connector on the High Voltage Unit.
Figure 4-28. Harness Removal
5. Remove two screws (3501) securing the High Voltage Unit to the
printer frame.
Disassembly/Assembly
Disassembly Procedure
Figure 4-29. High Voltage Unit Removal
Revision B
118