Relay Board And Cooling Fan Removal - Epson SEIJ98006 Service Manual

EPSON Stylus Color 900

4.2.4 Relay Board and Cooling Fan Removal

1. Remove the C265 Main board. (See Section 4.2.3.)
2. Remove all connectors from the relay board. (See Figure 4-5 when
connecting them.)
3. Remove two screws securing the relay board to the shield plate on
the C265 Main board, then remove the relay board.
4. Remove three screws securing the cooling fan unit to the shield
plate on the C265 main board, then separate the cooling fan from
the C265 Main board.
5. Disconnect the connector CN13 (white, 2-pin) from the C265 Main
board, and remove the cooling fan unit.
Disassembly and Assembly
Screws securing the
Cooling Fan Unit
Figure 4-7. Relay Board and Cooling Fan Removal
Disassembly Procedures
Screws securing the Relay Board
Relay Board
CN13
Cooling Fan Unit
Revision C
109