Basic Specifications; Controller Specifications - Epson EPL-N2700 Service Manual

EPSON EPL-N2700 / N2750

1.2 Basic Specifications

This section describes the basic specifications of the EPL-N2700 / EPL-
N2750.

1.2.1 Controller Specifications

CPU
VR4310 / 166MHz
RAM
Standard 16MB (on-board)
o
Optional 8MB
o
256MB
Can be expanded up to 256MB.
ROM
Font: 2Mbytes (on-board) for EPL-N2700
o
4Mbytes for EPL-N2750
Program: 4Mbytes (on Flash ROM-DIMM board)
o
Expansion ROM: 3 ROM-DIMM slots (Can be removed/
o
installed at power on only)
Available for NLSP FONT* DIMM and
PostScript 3 DIMM
NOTE: EPL-N2750 has NLSP FONT as standard.
*1. 4.5MB is allocated for the program area. The RAM Check at startup
shows the attached memory size, while the status sheet shows the
size with the program code size deducted as well as the attached
memory.
*2. Not mentioned in any catalog nor specifications, since they are
hardly distributed.
*3. Availability of 256MB RAM, which may be distributed in future, will
be determined after the printer is in market.
Product Description
*1
*2 *2
/16MB /32MB/64MB/128MB/
*3
(SDRAM type,1 slot)
Interfaces
Standard interface:
o
Parallel interface:
n
Bidirectional parallel I/F (B type connector)
(IEEE-1284 compliant / Compatibility, Nibble and ECP mode)
Serial interface:
n
RS-232C
Ethernet
Optional interface:
o
Control Panel
Consists of the 8 push-button switches, 6 LED lamps, and 20-digit LCD
Installation format
Direct attachment
Other Feature
Does not support mechanism controller.
Basic Specifications
100/10BaseTX
Type-B interface slot (1 slot)
Revision B
15