Uninstalling The Msd-431-L - AMX MST-431 Operation/Reference Manual

Installation
If you see a gap between the panel and the back box, or feel any binding while
locking down the panel, stop immediately and verify that no cables or other items are
in the way. Do not force the panel into position, as this can cause damage to the
touch screen or the panel electronics.
12.
Reconnect the terminal Ethernet and USB to their respective locations on either the Ethernet port or
NetLinx Master.

Uninstalling the MSD-431-L

The MSD-431-L is held in place to the back box via latch hooks and clips on the back box (FIG. 15), securing
it to the mounting surface. In certain circumstances, such as firmware updates or other maintenance that
requires accessing the device's Micro-USB ports the device may need to be removed from the back box. The
clips that lock down the MSD-431-L's bottom edge may be unlatched in order to remove the device from the
mounting surface.
To remove an MSD-431-L from its back box:
1.
From the bottom, pull gently outward from the back box. Gently rock the panel back and forth to free the
bottom from the back box.
2.
Rotate it up to release the top latch hooks, and carefully pull the device free from the back box. Take care
not to damage or pull the connections on the back of the device.
Always pull on the frame of the touch panel. NEVER pull on the glass edge.
18 MST-431/MSD-431-L 4.3" Modero S Series® Touch Panels