Olympus SP·570UZ Instruction Manual page 76

....
Q)
+-'
+-'
Q)
.0
ro
....
Q)
E
ro
t)
When you get an error message on the camera
~-
Monitor indication Possible cause Corrective action
[0
There is a problem with the This card cannot be used. Insert a new
card. card.
CARD ERROR
[0 Writing to the card is The recorded image has been protected
prohibited. (read-only) on a computer. Download the
WRITE PROTECT
image to a computer and cancel the read-
only setting.
ill
The internal memory has no Insert a card or erase unwanted data.
available memory and Before erasing, backup the data of
MEMORY FULL
cannot store any new data. important pictures onto the card, or
download such pictures to a computer.
[0 The card has no available Replace the card or erase unwanted data.
memory and cannot store Before erasing, download important
CARD FULL
any new data. pictures to a computer.
-
,----,
There are no pictures in the The internal memory or the card contains
I I
I I
internal memory or on the no pictures.
,,----~
NO PICTURE card . Record pictures.
IT]
There is a problem with the Use image processing software to view the
selected picture and it
picture on a computer. If that cannot be
PICTURE ERROR
cannot be played back on done, the image file is damaged.
this camera .
IT]
If pictures taken by other
Use image processing software to edit the
cameras are selected, they pictures.
I
THE IMAGE CANNOT
cannot be edited.
BE EDITED
-
The card cover is open. Close the card cover.
CARD-COVER OPEN
c::J The battery is empty. Insert new batteries. When using
rechargeable batteries, charge the
BATTERY EMPTY
batteries.
Recording has
When [IMAGE STABILIZER]
Allow the camera to cool down for some
stopped to allow
is set to [ON], the camera's time before you begin shooting again. Or
camera to cool.
internal temperature rises you can shoot with [IMAGE STABILIZER]
Please wait a
due to continuous movie set to [OFF].
moment.
recording for a long period,
Camera is cooling.
thereby causing shooting to
Please wait a
stop.
moment.
Data in the card cannot be
.
Select [CLEAN CARD], and press
@.
C....RD SE-TUP
read. Or, the card is not
Remove the card and wipe the contact
I
formatted. area with a soft dry cloth.
~CLEANCARO
.
Select [FORMAT] • [YES] and press
kiNk
@.
All data on the card is erased.
SET.l.2.!9
76
EN