Olympus SP·570UZ Instruction Manual page 56

Operating, shutting off and checking the alarm
Operating the alarm:
Turn off the camera. The alarm only operates when the camera is off.
Shutting off the alarm:
While the alarm is sounding, press any button to shut off the alarm and turn off the camera.
After 1 minute of no operation, the alarm stops automatically and the camera turns off when
[SNOOZE] is set to [OFF].
Checking the alarm settings:
While the camera is off, press DISP./6 to display the set alarm time and the current time for 3
seconds.
VIDEO OUT
NTSC / PAL
Playing back pictures on a TV
The factory default settings differ according to the region where the camera is sold.
To play back camera images on a TV, set the video output according to your TV's video signal type.
• TV video signal types differ by country/region. Check the video signal type before connecting the
camera to the TV.
NTSC
PAL
North America, Taiwan, Korea, Japan
European countries, China
AV cable (provided)
(/)
c
o
...
CO
L..
Q)
Q.
o
:::J
C
Q)
~
Playing back pictures on a TV
Turn off the camera and the TV before connecting.
Connector cover - - - - - " " " \
Settings on the TV
Turn the TV on, and set it to video input mode.
• For details of switching to video input, refer to
your TV's instruction manual.
• Images and the information displayed on the
screen may become cropped depending on the
TV's settings.
Connect to the TV's video input (yellow) and
audio input (white) terminals.
Multi-connector
Settings on the camera
Turn the camera on in playback mode.
• The last picture taken is displayed on the
TV. Use the arrow pad to select the picture
you want to display.
FRAME ASSIST
OFF /
§33
.....................
/ C8J
Displaying the frame assist/Determining the type of frame assist
Press DISP./6 in shooting mode to determine the type of frame assist to be displayed.
When [OFF] is selected, pressing DISP./6 will not display the frame assist.
56
EN