=1\
FLASH
Setting to use an external flash
INTIEXT
~RC
SLAVE
Allows you to take pictures using the built-in flash or a dedicated
external flash.
I@f
"External flash shooting" (P .82)
Allows you to take pictures using a flash that is compatible with the
Olympus wireless RC flash system.
I@f
"Shooting with the Olympus wireless RC flash system" (P.84)
When using a commercially available slave flash that is synchronized
with the camera flash, the amount of the light emitted by the flash can
be adjusted in 10 levels.
Selecting an emission level
•
When flash is set to [SLAVE], flash mode automatically changes to [~] (Fill-in flash) for all flash
modes except [@] (Flash off).
SLAVE FLASH
,
Press
6'V
to select an emission level from [1] to [10], then press
@.
The bigger number indicates the bigger amount of light emitted
by the flash.
• The flash can fire in sequential shooting mode, but the interval
between shots will be longer if a high emission level is set.
• (still pictures)
Recording sound with still pictures
OFF
ION
It automatically starts recording for about 4 seconds after shooting pictures.
When recording, aim the camera microphone at the source of the sound you want to record.
IVVBi.j
Adjusting the white balance compensation
• The white balance can be adjusted in 7 increments in both the
[BLUE] and [RED] directions.
6
Each press makes the color more blue.
'V
Each press makes the color more red.
Press
@
after setting is complete.
PICTURE MODE
Adjusting the color tone of the image
VIVID
NATURAL
Produces vivid colors.
Produces natural colors.
EN
43