Olympus SP·570UZ Instruction Manual page 42

When
[AREA]
is selected
• To move the AF target mark
The AF target mark changes to
' = :="
Use the arrow pad to
move the position of the AF target mark.
You can take pictures while in this status.
• To set the position of the AF target mark
Hold down
@.
To change the position of the mark, hold down
@
again.
FUllTIME AF
Shooting pictures while keeping the subject in focus
OFF
ON
AF PREDICT
Shooting pictures with the focus on subjects moving back and forth
OFF
- - - - - - - - - - - - _
..
__
.
AF predict is deactivated.
ON
When activated, position the AF target mark on the subject and press
the shutter button halfway to engage the AF predict. Then, press the
shutter button completely to take the picture.
- - _
..
_ - - _ . _ - - - - - - - - - - - - - - - - - - - - - - - - -
• AF predict continues to operate while the shutter button is pressed halfway
U;J
AF
blinks).
• Depending on the subject, the picture may be out of focus even if [AF PREDICT] is set.
• During macro and super macro mode, [AF PREDICT] is not available.
AF illuminator does not light.
- - - - - - - - - -
Press the shutter button halfway. The AF illuminator lights
automatically, allowing you to focus in a dark place.
OFF
ON
- - - - - - - - - - _ . - - - - - - - - - - - - -
. _ - -
.. - . _ - - - - - - - - _ . - - - - - - - - -
IMAGE STABILIZER
Shooting pictures using digital image stabilization
This function stabilizes the blur caused by camera movement when taking pictures.
AF IllUMINAT. .
Setting to light the illuminator in a dark place
en
c
o
:.;::J
CO
~
Q)
0..
o
::J
C
Q)
~
OFF
Digital image stabilization is deactivated.
ON
Digital image stabilization is activated after pressing the shutter button
halfway.
• When taking pictures with the camera stabilized (using a tripod), set to [OFF].
• Images may not be correctable if the camera is severely shaken.
• During night shooting or when the shutter speed is very slow, the Digital image stabilization
mode may not work.
1m
Adjusting the amount of light emitted by the flash
Depending on situations such as shooting small subjects or distant backgrounds, it may be
advisable to adjust the amount of light emitted by the flash. In addition, this function is useful when
increased contrast is desired.
-2.0EV to 0.0 to +2.0EV
Press
6 \J
to adjust, and press
@.
42
EN