Olympus SP·570UZ Instruction Manual page 65

D
Note
o
Use a computer with a pre-installed operating system. Operations are not guaranteed on
home-built computers or computers with an updated operating system.
o
Operations are not guaranteed when using an added USB or IEEE 1394 (FireWire) port.
o
To install the software, you must log on as a user with administrators' privileges.
o
If you are using Macintosh, be sure to remove the media (drag & drop onto the trash icon)
before performing the following operations. Failure to do so could result in unstable computer
operation and the need to reboot.
o
Disconnect the cable connecting the camera to the computer
o
Turn off the camera
o
Open the camera's battery/card compartment cover
For how to install the OLYMPUS Master software, refer to the installation guide
included in the CD-ROM.
£onnecting the camera to a computer .
1
Make sure the camera is turned off.
o
The monitor and viewfinder are off.
o
The lens is retracted.
2
Connect the multi-connector on the camera to
the USB port on the computer using the
provided USB cable.
o
Refer to your computer's instruction manual to locate the
position of the USB port.
o
The camera turns on automatically.
o
The monitor turns on and the selection screen for the USB
connection is displayed.
3
Select [PC], and press
@.
Viewfinder
Monitor
Connector cover
Multi-connector
USB
SET+loKI
EN
65
c
(f)
::::J
<0
o
r
-<
~
""U
C
(J)
~
Q)
(f)
.-+
CD
,