Section 3 Installation; Installing The Display Unit; Choosing A Location For Installation; Standard Mounting - JRC FF50 Instruction Manual

SECTION 3
24

Installing the Display Unit

Choosing a Location for Installation

This display unit produces heat. Do not install it in a
poorly ventilated or excessively hot area place.
Do not install the equipment at a location where it is
constantly splashed with water. If the equipment is
splashed with water, immediately wipe with a dry
cloth. Leaving the equipment in this condition may
cause electric shock or malfunction.
The two most important considerations for mounting the FF50 Color Fish
Finder display unit are:
• Choosing the best location for operating and viewing
• Protecting the unit from the environment

Standard Mounting

Affix the Display Unit to a hard wooden or metal
plate with the specified screws when mounting it to
a tabeltop or suspending it. Otherwise the Display
Unit, weighing 8.8 lbs (4
injury or damage.
Typically the unit can be mounted with its yoke assembly to a chart tabletop
or suspended from an overhead location. Figure 3-1 shows the recommended
clearances for yoke mounting.
Installation
CAUTION
WARNING
) may drop, causing