Anchor Alarm - JRC FF50 Instruction Manual

• Push to display the ALARM menu.
Press the up or down to select ARRIVAL and push it in to
display the ARRIVAL ALARM ON/OFF and distance setting pull-
down menu.
Specify a distance, select ON and push the
ARRIVAL ALARM on.
Select OFF and push the
off.
Push to mute the ARRIVAL ALARM temporarily.
(The ARRIVAL Alarm itself is not cancelled.)
Note:
You cannot turn the ARRIVAL ALARM on unless GOTO or
FOLLOW ROUTE is activated.

Anchor Alarm

• When turned on, this alarm shows a message on the screen and also
sounds the buzzer when the distance between your vessel and the
waypoint displayed in the NAVIGATION window becomes equal to
or greater than the operator's preset value.
• Push to display the ALARM menu.
Press the up or down to select ANCHOR and push it in to
display the ANCHOR ALARM ON/OFF and distance setting pull-
down menu.
Specify a distance, select ON and push the
ANCHOR ALARM on.
Select OFF and push the
off.
Push to mute the ANCHOR ALARM
temporarily. (The ANCHOR ALARM itself is not cancelled.)
Note:
You cannot turn the ANCHOR Alarm on unless GOTO or
FOLLOW ROUTE is activated.
in to turn the
in to turn the ARRIVAL ALARM
in to turn the
in to turn the ANCHOR ALARM
49