Edit Waypoint - JRC FF50 Instruction Manual

66

Edit Waypoint

• You can store, modify, copy and delete waypoints using this item.
• Press the up or down to select EDIT WPT and push it in to
open the WAYPOINT list. You can store up to 400 waypoints. The
list is composed of 40 pages, each page consists of 10 waypoints. Press
the up or down to move the waypoint selection frame up or
down. Press the
route plan is activated, you cannot select waypoints used in the
activated route plan. (An * appears to the left of the waypoint
numbers in use.)
• Always use the WAYPOINT list when you store, modify, copy and
delete waypoints.
Each procedure is described below.
Storing waypoints
Select an unused waypoint number and push the
the WAYPOINT setting pull-down menu. Press the
left or right to move the setting frame for each letter and press the
up or down to name the waypoint. Then, press the
to the left or right to move the setting frame for bearing,
degree, minute, one-thousandth minute, respectively and press the
up or down to enter the latitude and longitude. Finally,
push the in to store the entered information of the
waypoint. Push
storing.
Modifying waypoints
Select a waypoint number you want to modify and push the
to open the menu to select MODIFY, COPY or DELETE. Press the
up or down to select MODIFY and push it in to open the
WAYPOINT setting pull-down menu, the same as the menu for
storing waypoints. In the same way as in storing waypoints, move the
setting frame to the portion you want to modify. Finally, push the
in to complete the modification. Push
pushing the
to the left or right to change pages. When a
before pushing the
in to abort modification.
in to open
to the
in to abort
before